Fast Finding

Mica grinder mill,Mica Powder Processing equipment

HGM10036 Mica grinder mill is mainly applied to non-inflammable, non-explosive and brittle materials with Mohs hardness under six. Such as calcite, chalk, limestone, Mica, kaolin, gypsum, etc, totally more than 100 kinds of materials.

Over View
Features
Applications
Technical Data

    Our mica grinding mills include Raymond mill, HGM Ultrafine grinder mill . Raymond mill is the vertical grinding mill, which is popular in many countries and has very long history. HGM Ultrafine grinder mill is special for super thin grinding. You can choose suitable mica grinding mill depends on your mica size, hardness, capacity and your cost budget.

    Mica grinder mill line:

    Clirik has the best mica ultrafine grinder mill. Under the same finished final size and the same motor power, the capacity of micro powder grinding mill is twice as much as jet mill, mixing grinder and ball mill. And the application of pulse deduster and muffler greatly alleviates dust pollution and noise. If you want to reduce the cost of production you can choose our mica ultrafine grinder mill.

    Raw mica first enters jaw crusher to be crushed to smaller size. They are lift to storage room by elevator. Vibrating feeder will feed materials into grinding chamber evenly and gradually. After being grinded, the quartz powder will be blow to cyclone by blower. Then the mica powder will be transferred to storage room through pipes, and then will be discharged as final products.

    Production Line Configuration of Mica grinder mill :
    The whole set HGM Mica mill consists of hammer crusher, bucket elevator, storage hopper, vibrating feeder, main unit, inverter classifier, cyclone collector, pulse deduster system, high pressure positive blower, air compressors and electrical control systems.
   
    Working Principle of Mica grinder mill :
    The main bearing and each dial are driven by electromotor of main machine through reducer, and numbers of rollers, which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small ones and are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe. The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse materials return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.

Performance and features Of Mica grinder mill:
1.    High efficiency
Under the same final size and power, the product capacity of ultrafine mill is twice than jet mill and agitation mill.
2.    Longer lifetime of spare parts
    The roller and ring are made of special material, which improve the grinding efficiency a lot. For same material and final size, the lifetime of its wearing parts can reach to more than one year, about 2-5 times as long as that of vertical shaft impact crusher and turbo-mill. Especially when handling calcium carbonate and calcite, the lifetime can reach 2-5 years.
3.    High safety and reliability:
    There are no rolling bearings and bolts in grinding cavity, so problems caused by bolts shedding or wear of bearings and seal components will never happen.
4.    High fineness of products
    The product fineness can reach D97≤5μm.
5.    Environment friendly
    The application of pulse dust collector and muffler reduce the pollution and noise of the dust, which has reached national environment protection standard.
 The Application of Mica grinder mill :
    HGM Mica grinder mill is mainly applied to non-inflammable, non-explosive and brittle materials with Mohs hardness under six. Such as calcite, chalk, limestone, Mica, kaolin, gypsum, etc, totally more than 100 kinds of materials. Product fineness can be controlled between 325~2500 mesh.
 
 Technical data of Mica grinder mill:

Parameters of HGM Series Ultrafine Grinding Mill
Model HGM80 HGM80A HGM90L HGM100L-Ⅱ HGM100P HGM125L HGM1680L
Ring Diameter(mm) 800 800 900 1000 1000 1250 1680
Ring Number (PCS) 3 3 4 4 4 4 4
Input Size (mm) ≤10 ≤10 ≤10 ≤15 ≤15 ≤20 ≤20
Output Size (mesh) 150-3000 150-3000 150-3000 150-3000 150-3000 150-3000 150-3000
Capacity (t/h) 0.5-5.5 0.5-5.5 0.8-6.5 1.2-10 1.2-11 2.5-20 5-45
Outlet Size L*W*H (mm) 8605*4139*6050 10454*3393*6626 11735*3952*7525 14507*3633*7562 14362*4200*7562 19261*4406*8591 25067*5414*9007
Main Motor Power (kw) 75 75 55*2 132/75*2 132/75*2 185 315

Note: This specification is just referencing, any changes are subject to the products.

Need help? Live Chat

Top