clirik CLJM-L fluidized bed jet mill system — CLJM-L fluidized bed jet mill for dry ultrafine powder processing

مطحنة نفاثة ذات قاع مميعة

Model: CLJM-L Series

Six CLJM-L models combine dynamic classification with 0.5–75 μm output and 0.5–600 kg/h (1.1–1,323 lb/h) capacity, while classifier speed, gas pressure, feed rate and material behavior determine the actual production point. Air or nitrogen operation and steel, alloy or ceramic contact options match dry abrasive, heat-sensitive, high-purity and oxidation-sensitive powders. Material testing converts the budgetary starting price into a model, utility and performance proposal.

Output fineness0.5–75 μm
السعة0.5–600 kg/h (1.1–1,323 lb/h)
Working pressure0.75–0.85 MPa (109–123 psi)
Model rangeCLJM-100 to CLJM-800
الحد الأدنى لكمية الطلب1 unit
الإعداداتAir or nitrogen; selectable contact materials

Match the CLJM-L Model to Fineness, Throughput and Air Demand

Select a model from the required production point, not from unrelated maximum values. The published range covers six sizes, but material behavior, target d97, classifier speed, gas pressure and feed rate determine the achievable combination.

الطراز	السعة	Air demand	Pressure	Motor
CLJM-100	0.5–10 kg/h (1.1–22 lb/h)	3 m³/min (106 ft³/min)	0.75–0.85 MPa	25 kW (34 hp)
CLJM-200	10–100 kg/h (22–220 lb/h)	4.5 m³/min (159 ft³/min)	0.75–0.85 MPa	40 kW (54 hp)
CLJM-300	80–120 kg/h (176–265 lb/h)	6 m³/min (212 ft³/min)	0.75–0.85 MPa	60 kW (80 hp)
CLJM-400	50–260 kg/h (110–573 lb/h)	10 m³/min (353 ft³/min)	0.75–0.85 MPa	95 kW (127 hp)
CLJM-600	80–450 kg/h (176–992 lb/h)	20 m³/min (706 ft³/min)	0.75–0.85 MPa	188 kW (252 hp)
CLJM-800	200–600 kg/h (441–1,323 lb/h)	40 m³/min (1,413 ft³/min)	0.75–0.85 MPa	380 kW (510 hp)

Increasing classifier speed generally makes a finer cut, while gas pressure, feed rate and material fracture behavior shift both throughput and energy demand. A material trial is required before clirik fixes a guaranteed production point.

Choose Contact Materials and Gas Mode from the Powder Risk

Dry, brittle powders that fluidize and fracture are the strongest candidates. Screen feed condition, abrasion, purity, oxidation and dust hazard before choosing the contact surfaces and process-gas circuit.

Powder condition	Contact strategy	Gas mode	Engineering action
Dry, non-reactive, low-abrasion	Standard steel or stainless steel	Clean, dry compressed air	Confirm feed size, moisture, d97 and capacity by test
Abrasive or high-purity	Wear-resistant alloy or ceramic contact parts	Air or compatible inert gas	Set contamination limit and cleaning method
Oxidation-sensitive or combustible	Compatible sealed contact system	Engineered nitrogen closed loop	Complete dust-hazard and oxygen-control review

Wet, sticky, fluffy, elastic or ductile feeds may not circulate or fracture reliably. Drying, pre-sizing, another milling route or an application trial should be agreed before equipment selection.

Turn Material Test Data into a Firm CLJM-L System Quote

Budget from USD 21,800 per unit, EXW Shanghai. This is a starting point for a basic configuration, not a guaranteed production-system price; model size, gas preparation, feeding, collection, controls, contact materials and safety options define the final value.

Send the material name, safety data, feed particle size, moisture, bulk density, target d97 and hourly capacity. For purity-sensitive work, add the allowable contamination level and product-recovery target. clirik uses the agreed trial basis to select the model, classifier settings and utility demand.

The proposal can then state the equipment boundary, utilities, performance basis, packing, delivery window and commissioning scope. This makes competing quotations comparable and keeps test assumptions attached to the commercial offer.

CLJM-L Fluidized Bed Jet Mill Specifications

Use the ranges below for preliminary sizing; final d97 and capacity are confirmed with the buyer’s material and test basis.

اطلب عرض أسعار ↗الدردشة عبر الإنترنت ↗

اسم المنتج	مطحنة نفاثة ذات قاع مميعة
Model / part number	CLJM-L series: CLJM-100, 200, 300, 400, 600 and 800
فئة المنتج	Industrial fluidized-bed opposed jet mill with dynamic classifier
Product size range	Output fineness 0.5–75 μm; maximum feed size 5 mm (0.20 in)
Cut-size basis	Final d97 and top-size cut confirmed by material test; classifier speed is adjustable
Construction	Carbon steel or stainless steel; wear-resistant alloy or ceramic contact options
System interface	Feeder, opposed jet nozzles, dynamic classifier and specified cyclone/filter collection
Evidence	CE conformity and ISO 9001 quality-management evidence available for review
Traceability	Model, serial number and order records supplied with the machine
وحدة التعبئة والتغليف	1 complete configured system per export shipment

Define the Operating Window Clearly

Capacity and fineness are material-dependent; use the published equipment envelope for screening and the trial result for commitment.

0.5–75 μmOutput fineness

0.5–600 kg/hCapacity (1.1–1,323 lb/h)

3–40 m³/minAir demand (106–1,413 ft³/min)

25–380 kWMotor power (34–510 hp)

Working mediumClean, dry compressed air; engineered nitrogen loop when required

Working temperatureLow-temperature grinding; inlet temperature and dew point set for the material

Working pressure0.75–0.85 MPa (109–123 psi)

Process limitationsDry, free-flowing feed; pretreat wet, sticky, elastic or ductile material and complete any dust-hazard review

MOQ, Price and Delivery Basis

Commercial values below are preliminary and become binding only in the final signed quotation.

الحد الأدنى لكمية الطلب1 unit
Material testPaid test available; charge may be credited by quotation
Test lead time7–15 working days after sample receipt and plan approval
Bulk lead time45–90 working days after configuration, drawing and payment approval

Starting price and availabilityFrom USD 21,800 per unit, EXW Shanghai; in stock for quotation
التغليفMoisture-protected export packing; reinforced wooden cases where applicable
Payment terms30% deposit and 70% before shipment unless otherwise agreed
Shipping supportSea or air documentation, nominated-forwarder support and commissioning coordination

Manufacturer and Production Support

Verified identity and capability for project review.

Shanghai clirik factory and powder-equipment manufacturing facility

شركة شنغهاي كليريك للآلات المحدودة.

Located at No.19 Fuqing Road, Pudong New Area, Shanghai, China, clirik manufactures and supplies grinding, classification and powder-collection systems and supports material testing, configuration, assembly and export documentation.

Grinding and dynamic-classification system engineering
Manufacture, assembly and application testing
Standard and engineered contact-material or gas-circuit configurations
Export packing, documentation and commissioning coordination

Certificates and Review Evidence

Copies and current scope should be confirmed against the final order and destination-market requirements.

Shanghai clirik CE certificate of conformity

EC Examination Certificate / CECopy available for review
ICAS ISO 9001 quality-management-system certificateScope and validity available for review
SGS Audited Supplier ReportReport available for review
HGM roller ultrafine mill utility-model patent and product awardSupporting evidence available for review