Clirik
Search
Devoted to the field of micro powder grinding mills
Devoted to the field of micro powder grinding mills
Take a visual look inside our engineering tolerances, quality workflows, and field assembly.
Select your equipment type to explore compatible spare parts manufactured by CLIRIK.
Roller, Ring, Pins, Turn Plate, Classifier Impeller
Roller, Ring, Spider Arm, Shovel Blade, Base, Impeller
Grinding Wheel, Table, High Efficiency Classifier
Swing/Fixed Plates, Hammers, Grate Screens, Guard Plates
Motors, VFDs, Reducers, Cables, Screen Mesh, Filter Bags & Valves
Select your equipment type to explore compatible wear parts and spares.
HGM80 / HGM100 / HGM125
Installed in the main grinding chamber, the core wear-resistant part for crushing materials.
HGM80 / HGM100 / HGM125
Installed in the main grinding chamber, the core wear-resistant part for crushing materials.
HGM80 / HGM100 / HGM125
Installed inside the top classifier, high-speed rotation for precise powder separation.
HGM80 / HGM100 / HGM125
Installed in the main power transmission unit, connecting rotating shafts to transmit torque between motor and gearbox.
HGM80 / HGM100 / HGM125
Installed inside the gear reducer, connecting input power directly to the bevel gear drive system.
HGM80 / HGM100 / HGM125
Installed inside the gear reducer, changing drive transmission direction by 90 degrees with high torque.
HGM80 / HGM100 / HGM125
Installed on the HGM main shaft, it rotates to throw material into the gap between the rollers and the grinding ring.
HGM80 / HGM100 / HGM125
Installed in the middle section of the HGM mill, it forms the grinding chamber that holds the roller assembly and grinding ring.
HGM80 / HGM100 / HGM125
Installed inside the pulse dust collector, filtering fine powder from airflow for clean air output.
HGM80 / HGM100 / HGM125
Installed inside the pulse dust collector, providing structural support to keep filter bags open.
HGM80 / HGM100 / HGM125
Installed in the main drive unit, providing primary power for the mill, blower, or classifier.
HGM80 / HGM100 / HGM125
Installed inside the mill base, it houses the main shaft bearings and keeps the shaft aligned and sealed from dust.
HGM80 / HGM100 / HGM125
Installed inside the speed reducer, transmitting torque and reducing speed between drive shafts.
HGM80 / HGM100 / HGM125
Installed in the main drive system, transferring power smoothly from the motor to the mill.
HGM80 / HGM100 / HGM125
Installed inside the central control cabinet, protecting electrical circuits and managing system operations.
HGM80 / HGM100 / HGM125
Installed on the main shaft and roller shafts, it carries radial and axial loads at working temperature.
HGM80 / HGM100 / HGM125
Installed inside the gear reducer system, circulating lubricating oil continuously to protect gears and bearings.
HGM80 / HGM100 / HGM125
Installed on the gear reducer assembly, cooling down circulating oil during heavy-duty operation.
HGM80 / HGM100 / HGM125
Installed on the pulse dust collector system, releasing compressed air pulses for filter bag cleaning.
HGM80 / HGM100 / HGM125
Installed around the classifier rotor, it forms the air path that separates fine powder from coarse particles.
HGM80 / HGM100 / HGM125
Installed inside the main grinding mill assembly, absorbing impact and reducing mechanical wear.
HGM80 / HGM100 / HGM125
Installed inside the pulse jet valve of the dust collector, controlling high-pressure air pulses.
HGM80 / HGM100 / HGM125
Installed in the electrical control cabinet to monitor current and safeguard system operation.
HGM80 / HGM100 / HGM125
Installed between the grinding roller and turnplate, it lets the roller swing outward and press against the grinding ring.
HGM80 / HGM100 / HGM125
Installed inside the main electrical control panel, regulating motor speed to adjust classifier fineness.
HGM80 / HGM100 / HGM125
Installed on the raw material silo or hopper, detecting powder levels for automatic feeding control.
CLG Coating Machine
Installed at the modification chamber inlet and outlet, monitoring real-time processing temperatures to ensure optimal coating efficiency.
HGM80 / HGM100 / HGM125
Installed on mill liners, access doors and flange connections as a general-purpose fastener.
Air Compressor
Installed on the air compressor outlet, it removes water, oil and dust before compressed air reaches the pulse valves.
HGM80 / HGM100 / HGM125
Installed on the dust collection system, it drives the pulse valves and pneumatic discharge gates.
HGM80 / HGM100 / HGM125
Installed on top of the bearing sleeve, it seals the upper bearing and centers the shaft.
HGM80 / HGM100 / HGM125
Installed at the bearing lubrication point, it allows grease to be injected with a grease gun.
HGM80 / HGM100 / HGM125
Installed in the classifier housing, it guides the rotor shaft and takes the wear instead of the housing.
HGM80 / HGM100 / HGM125
Installed at the dust collector outlet, it discharges collected powder automatically while keeping the system airtight.
HGM80 / HGM100 / HGM125
Installed at high-temperature, dust-laden pivots such as the roller rocker arms, it lubricates itself where grease cannot be applied.
HGM80 / HGM100 / HGM125
Installed on the bearing housing, it locks the bearing outer ring and seals out dust.
HGM80 / HGM100 / HGM125
Installed in the shaft keyway, it locks pulleys, couplings and gears against rotation.
HGM80 / HGM100 / HGM125
Installed as a pair on the main shaft, the locknut sets the bearing preload and the compression nut locks it in place.
HGM80 / HGM100 / HGM125
Installed on the main shaft, it locks the bearing and hub axially and is tightened with a hook spanner.
HGM80 / HGM100 / HGM125
Installed as one unit at the mill center, it combines the shaft, bearings and hub and is replaced as a whole during overhaul.
HGM80 / HGM100 / HGM125
Installed vertically in the mill center, it transmits torque from the reducer down to the turntable.
HGM80 / HGM100 / HGM125
Installed for servicing the mill — the hook spanners loosen the shaft locknuts and the slotted plate locks the turntable during disassembly.
HGM80 / HGM100 / HGM125
Installed between the motor and the main shaft, it reduces speed and multiplies torque to drive the grinding table.
HGM80 / HGM100 / HGM125
Installed in the flange joints of air ducts and material pipes, it seals against heat and chemical attack.
HGM80 / HGM100 / HGM125
Installed in the shaft or bore groove, it holds bearings and gears axially in position.
HGM80 / HGM100 / HGM125
Installed on the screw feeder drive end, it feeds raw material into the mill at a steady, controlled rate.
HGM80 / HGM100 / HGM125
Installed in shaft glands and flange grooves, it prevents powder leakage and grease loss.
HGM80 / HGM100 / HGM125
Installed between the drive and the screw feeder blades, the spline shaft transmits rotation to the blades while the hanger holds it stable in a horizontal plane.
HGM80 / HGM100 / HGM125
Installed on the mill cover, flanges and heavy housing joints, they clamp the parts together — the M30×150 bolt is grade 8.8.
HGM80 / HGM100 / HGM125
Installed on the HGM main shaft, it rotates to throw material into the gap between the rollers and the grinding ring.
40+
High-Volume Lines
Ensuring stable, large-scale, and consistent supply.
50+
Expert Engineers
Focused on high-precision mechanical R&D.
60+
Service Specialists
Professional 24/7 on-site support and maintenance.
20+
Years of Grinding Excellence
Deeply rooted in the powder processing industry since 2002, providing stable and innovative solutions for decades.
100+
Monthly Capacity
Massive manufacturing power to meet global demands.
180+
Patents & Honors
180+ Certificates, including IS09001, SGS, TUV, MIC LeadingFactory, Alibaba Verified Custom Manufacturer, CE and nearly 100 Patents.
40+
High-Volume Lines
Ensuring stable, large-scale, and consistent supply.
50+
Expert Engineers
Focused on high-precision mechanical R&D.
60+
Service Specialists
Professional 24/7 on-site support and maintenance.
20+
Years of Grinding Excellence
Deeply rooted in the powder processing industry since 2002, providing stable and innovative solutions for decades.
100+
Monthly Capacity
Massive manufacturing power to meet global demands.
180+
Patents & Honors
180+ Certificates, including IS09001, SGS, TUV, MIC LeadingFactory, Alibaba Verified Custom Manufacturer, CE and nearly 100 Patents.
CONTACT US
Every mineral has its unique value. Share your material specs and capacity
needs, and CLIRIK experts will tailor a cost-effective grinding solution to ensure
your project’s successful operation.
Address
No.19, Fuqing Rd, Pudong
New Area, Shanghai, China.
Find Us On :
Every mineral has its unique value. Share your material specs and capacity
needs, and CLIRIK experts will tailor a cost-effective grinding solution to ensure
your project’s successful operation.
Address
No.19, Fuqing Rd, Pudong
New Area, Shanghai, China.
Find Us On :
