Products

Emerald micro powder grinding mill

Emerald micro powder grinding mill industries in Zambia Emerald is a variety of the mineral beryl colored green by traces amounts of chromium and sometimes vanadium. The emerald deposits of Zambia in the Kafubu River, about 45km southwest of Kitwe, produced around 20% of world production of gem quality emeralds. According to one legend, in the middle ages, the emerald ground into powder, used to st

Over View
Features
Applications
Technical Data
Emerald micro powder grinding mill industries in Zambia
Emerald is a variety of the mineral beryl colored green by traces amounts of chromium and sometimes vanadium. The emerald deposits of Zambia in the Kafubu River, about 45 km southwest of Kitwe, produced around 20% of world production of gem quality emeralds.
According to one legend, in the middle ages, the emerald ground into powder, used to stop bleeding, treat eye diseases and trauma. Today, with the development of technology, emerald can be processed into micro powder for multiple uses, like Decoration, cosmetics, medicine, etc.
Mass production of Emerald micro powder has been a trend, so emerald micro powder grinding mills industries are increasingly emerging, especially in Zambia.
Introduce Of Emerald micro powder grinding mill
Detailed Product Description about Emerald micro powder grinding mill
Emerald micro powder grinding mill is mainly applied to grind non-inflammable, non-explosive and brittle materials with Mohs’ hardness under six. Such as calcite, chalk, limestone, dolomite, kaolin, gypsum, and talc etc, totally more than 100 kinds of materials. Product fineness can be controlled between 300~3000 mesh (47~5 micron) 
Comparable with ball mill, Emerald micro powder grinding mill has features of low cost, high capacity, easy operation; Comparable with Raymond mill for coarse powder up to 325 meshes, it can produce fine powders between 47 and 5 microns (300 to 3000 meshes)
Production Line Configuration of Emerald micro powder grinding mill:
The whole set HGM Emerald micro powder grinding mill consists of  hammer crusher, bucket elevator, storage hopper, vibrating feeder, main unit, inverter classifier, cyclone collector, pulse deduster system, high pressure positive blower, air compressors and electrical control systems
 Working Principle of Emerald micro powder grinding mill:
The main bearing and each dial are driven by electromotor of main machine through reducer, and numbers of rollers, which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small ones and are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe. The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse powder return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.

 
Features of Emerald micro powder grinding mill:
1. High efficiency
Under the same final size and power, the product capacity of Vermiculite grinding mill is twice than jet mill and agitation mill.
2. Longer lifetime of spare parts
The roller and ring are made of special material, which improve the grinding efficiency a lot. For same material and final size, the lifetime of its wearing parts can reach to more than one year, about 2-5 times as long as that of vertical shaft impact crusher and turbo-mill. Especially when handling calcium carbonate and calcite, the lifetime can reach 2-5 years.
3. High safety and reliability:
There are no rolling bearings and bolts in grinding cavity, so problems caused by bolts shedding or wear of bearings and seal components will never happen.
4. High fineness of products
The product fineness can reach D97≤5μm.
5. Environment friendly
The application of pulse dust collector and muffler reduce the pollution and noise of the dust, which has reached national environment protection standard.
Emerald micro powder grinding mill is for super-fine grinding materials with hardness less than 6 in Moh‘s scale and humidity less than 6 percent such as kaolin, limestone, basalt, calcite, marble, talcum, barite, gypsum, dolomite, bentonite mud, mica, pyrophyllite, sepiolite, carbon black, diatomite, graphite, alunite, fluorite, potassium feldspar, phosphorite, pigment, up to 200 kinds. The granularity (or final size) of the finished products can be freely adjusted between 325-3000meshes (0.045-0.005mm), and the capacity (ton/hour) ranges from 0.4T/H to12T/H depending on the final size and the grinding materials.
Model and technical data of Emerald micro powder grinding mill:
Model HGM80 HGM90 HGM100 HGM100A HGM125
Ring Diameter(mm) 800 930 1035 1300
Ring Number(PCS) 3 3~4 3 4 4
Roller Number(PCS) 21 24~32 27 34~36 40~44
Main Shaft Speed(r.p.m.) 230~240 200~220 180~200 135~155
Input Size(mm) ≦20
Finished Size/um(mesh) 5-47(325~2500)
Capacity (t/h) 0.5-4.5 0.6-6.5 0.7-7 1-8.5 1.5-12
Outlet Size (L*W*H, m) 13.9*4*6.2 14.7*4.8*7.2 18*4.6*8.6 14*9*10.25
Motor Power(KW) 145-165 185-204 263 263-290 380-430
Note: This specification is just referencing, any changes are subject to the products.

Need help? Live Chat

Top

FeedBack

Leave Us A Message ,We Will Contact With You As Soon As Possible

Name:

E-mail: *

Telephone:

Question:

Contact

For product information and pricing, Chat with sales agent:

or email us : sales@clirik.com

News Index

Click links below to see related products.