Products

Phosphate rock grinding mill

Phosphate rock grinding mill Phosphate rocks are those minerals that contain the tetrahedral coordinated phosphate anion along with the freely substituting arsenate and vanadate. Chlorine, fluorine, and hydroxide anions also fit into the crystal structure. The phosphate class of minerals is a large and diverse group, however, only a few species are relatively common. Uses of Phosphate rock: 1. Phos

Over View
Features
Applications
Technical Data
Phosphate rock grinding mill
Phosphate rocks are those minerals that contain the tetrahedral coordinated phosphate anion along with the freely substituting arsenate and vanadate. Chlorine, fluorine, and hydroxide anions also fit into the crystal structure. The phosphate class of minerals is a large and diverse group, however, only a few species are relatively common.

Uses of Phosphate rock:
1. Phosphate rock is a general term that refers to rock with high concentration of phosphate minerals, most commonly of the apatite group. It is the major resource mined to produce phosphate fertilizers for the agriculture sector. Phosphate is also used in animal feed supplements, food preservatives, anti-corrosion agents, cosmetics, fungicides, ceramics, water treatment and metallurgy.
2. The largest use of minerals mined for their phosphate content is the production of fertilizer.
3. Phosphate minerals are often used for control of rust and prevention of corrosion on ferrous materials applied with electrochemical conversion coatings.

>>Phosphate rock grinding mill applications:
Phosphate rock grinding mill is mainly applied to non-inflammable, non-explosive and brittle materials with Mohs’ hardness scale under seven, such as calcite, chalk, limestone, dolomite, carbon black, bentonite, kaolin, talc, mica, magnesite, illite, pyrophyllite , roseite, sea-foam, attapulgite , rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite, rock phosphate, kalium ore, pumice etc. totally more than 100 kinds of materials.
Finished powder products are in the 325meshs -3000meshs, and yield can be up to 0.5-12 tons per hour.

>>Phosphate rock grinding mill supplier:
There are five types of phosphate rock grinding mill that supplied by Shanghai CLIRIK machinery co., lt. They are HGM series grinding mills HGM80, HGM90, HGM100, HGM100A and HGM125.

>>Phosphate rock grinding mill production line:
The whole set phosphate rock grinding mill consists of  hammer crusher, bucket elevator, storage hopper, vibrating feeder, main unit, inverter classifier, cyclone collector, pulse deduster system, high pressure positive blower, air compressors and electrical control systems.

>> Phosphate rock grinding mill features:
1. High efficiency
Under the same final size and power, the product capacity of Vermiculite grinding mill is twice than jet mill and agitation mill.
2. Longer lifetime of spare parts
The roller and ring are made of special material, which improve the grinding efficiency a lot. For same material and final size, the lifetime of its wearing parts can reach to more than one year, about 2-5 times as long as that of vertical shaft impact crusher and turbo-mill. Especially when handling calcium carbonate and calcite, the lifetime can reach 2-5 years.
3. High safety and reliability:
There are no rolling bearings and bolts in grinding cavity, so problems caused by bolts shedding or wear of bearings and seal components will never happen.
4. High fineness of products
The product fineness can reach D97≤5μm.
5. Environment friendly
The application of pulse dust collector and muffler reduce the pollution and noise of the dust, which has reached national environment protection standard.

 >> Phosphate rock grinding mill working Principle:
The main bearing and each dial are driven by electromotor of main machine through reducer, and numbers of rollers, which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small ones and are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe. The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse powder return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.
>> Phosphate rock grinding mill features:
1. High efficiency
Under the same final size and power, the product capacity of Vermiculite grinding mill is twice than jet mill and agitation mill.
2. Longer lifetime of spare parts
The roller and ring are made of special material, which improve the grinding efficiency a lot. For same material and final size, the lifetime of its wearing parts can reach to more than one year, about 2-5 times as long as that of vertical shaft impact crusher and turbo-mill. Especially when handling calcium carbonate and calcite, the lifetime can reach 2-5 years.
3. High safety and reliability:
There are no rolling bearings and bolts in grinding cavity, so problems caused by bolts shedding or wear of bearings and seal components will never happen.
4. High fineness of products
The product fineness can reach D97≤5μm.
5. Environment friendly
The application of pulse dust collector and muffler reduce the pollution and noise of the dust, which has reached national environment protection standard.
>>Phosphate rock grinding mill applications:
Phosphate rock grinding mill is mainly applied to non-inflammable, non-explosive and brittle materials with Mohs’ hardness scale under seven, such as calcite, chalk, limestone, dolomite, carbon black, bentonite, kaolin, talc, mica, magnesite, illite, pyrophyllite , roseite, sea-foam, attapulgite , rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite, rock phosphate, kalium ore, pumice etc. totally more than 100 kinds of materials.
Finished powder products are in the 325meshs -3000meshs, and yield can be up to 0.5-12 tons per hour.
 >> Phosphate rock grinding mill model and technical data:
Model HGM80 HGM90 HGM100 HGM100A HGM125
Ring Diameter(mm) 800 930 1035 1300
Ring Number(PCS) 3 3~4 3 4 4
Roller Number(PCS) 21 24~32 27 34~36 40~44
Main Shaft Speed(r.p.m.) 230~240 200~220 180~200 135~155
Input Size(mm) ≦20
Finished Size/um(mesh) 5-47(325~2500)
Capacity (t/h) 0.5-4.5 0.6-6.5 0.7-7 1-8.5 1.5-12
Outlet Size (L*W*H, m) 13.9*4*6.2 14.7*4.8*7.2 18*4.6*8.6 14*9*10.25
Motor Power(KW) 145-165 185-204 263 263-290 380-430
Note: This specification is just referencing, any changes are subject to the products.

Need help? Live Chat

Top

FeedBack

Leave Us A Message ,We Will Contact With You As Soon As Possible

Name:

E-mail: *

Telephone:

Question:

Contact

For product information and pricing, Chat with sales agent:

or email us : sales@clirik.com

News Index

Click links below to see related products.